Quantcast
Channel: SCN : Popular Discussions - SAP for Oil & Gas
Viewing all 2091 articles
Browse latest View live
↧

Question about floating roof correction

March 14, 2010, 10:20 pm
$
0
0

Dear all,

 

I have just started to learn how IS-OIL solution is functioning and a question arises regarding floating roof correction.

 

In silo management function, you can simulate the material volume using material density, total height, material temperature and shell temperature(using LVCC calculator).

If the material density is increased, then the material volume is also increased.

(Of course floating roof correction indicator is set.)

 

I don't understand why material volume is increased when the material density is increased in the system.

 

And in a real  business, in what situation is material density increased?

Does that happen when the floating roof is replaced with a heavier one?

In SAP ERP I changed the floating roof weight value but it didn't affect the calculation result of the material volume.

(Note that the material density is not changed, and my understanding is that the density is not changed automatically when the roof weight is changed.)

 

Can somebody figure the above system behavior out and advise practical silo management in oil industry?

 

Thank you,

 

Yasuyo

↧
Search

Issue with Carrier update in shipment

November 10, 2014, 2:35 am
$
0
0

Hi Experts

 

 

 

I am trying to create TD Shipment and the vehicle is already configured and Carrier is also present, however when I check the vehical Tab the carrier didnt get populated .

Checked the Vehicle Master data , the Carrier part is freezed , how shall I check whether this carrier is assigned to Vehicle or not .How shall I populate the carrier automatically once I enter the Vehicle no in TD shipment  .

 

 

Screenshot attached .

 

Thanks in advance

MM_sD

↧
↧

Error-For object GL_LOCAL GBU1, number range interval does not exist

January 8, 2015, 2:33 pm
$
0
0

Hello experts

 

I attempted to post a JVA cash call in GJ01 and I encountered the following error. It does not state what number range interval is missing and that is my issue. I checked the number range interval for local ranges and it exists, both for years 9999 and 2015.  I have checked the number ranges for each document type to make sure that they exist. I did not receive any conflict in the number ranges assigned to various document types. I had read somewhere that this could be related to non-leading ledgers and I am no FI expert. What could be the problem and how can I resolve this issue?. I am looking for your help and guidance.


Please see the attached screenshots.


Thank you.


↧

How to calculate QCI when shipment confirmation for all Line Item?

January 26, 2015, 9:53 pm
$
0
0

Dear All,

 

I am facing problem as below.

 

     I created shipment having 4 compartment planning with capacity 5KL each. So I allocate and fill 5KL for each compartment. When I go to loading confirmation(O4G1) I have 4 line items for each compartment. When I calculate QCI for that shipment, I able to calculate only for 1st compartment (1st line Item). I want to calculate QCI for all (Compartments) line items or total quantity of the compartment.

 

I waiting for your valuable reply.

 

Regards,

Rahul Hande

↧

status /ico/mou of the user interface SAPMV45B Missing

April 30, 2013, 4:23 am
$
0
0

Hi Experts,

 

Kindly help me to resolve this issue in SAP IS OIL-OGSD

 

In Production Server, in transaction VA03 (Display Sales Order) when I try to access an item and click on OGSD  telesales tab in  screen getting an message as ’Status /ico/mou of the user interface SAPMV45B missing’.

 

I checked the same status in se41 , found generated both in quality and in production.

 

The message is not coming for quality server

 

Quality Server is the latest client copy of Production Server

 

Kindly help me to resolve this issue.

 

Regards,

Rajesh.S

↧
↧

MB5B Valuated Stocks or Storage Location

April 14, 2014, 7:43 am
$
0
0

Hi All,

 

When I run MB5B for Valuated Stocks it giving me stock volume which matches what MB5L states.

However, when I run it for Storage Location it is giving me a different volume.

Which is the correct transaction to based closing stock volumes off of.

 

Many Thanks,

 

Brian

↧

UoM issues on IS OIL installation - need T006 example

January 31, 2008, 8:58 am
$
0
0

Hello,

 

I'm doing an EH&S implementation on an IS-OIL system.

 

Some UoMs (Units of Measurement) on my clients system are setup quite strange which causes a lot of issues on the EH&S side.

 

For example metric tons are set up as T0 (That 0 is a zero) - which I have a hard time to believe that this is the standard IS-OIL UoM for metric tons.

 

Of course the clients claims to never have touched that table....

 

Could someone please send me their UoM entries from table T006 so I could do a comparison - no need to include customer specific UoMs.

 

Any help appreciated

 

Mark

↧

IS OIL TSW control data (activation of TSW)

February 17, 2007, 11:29 pm
$
0
0

I have activated IS OIL package in SAP ECC6 version, but when I try to access TSW control data screen, the screen is empty. Normaly I should find the following checkbox

 

     TSW active

     Automatically close shipment

     External Details for TSW

     Consider route for transp. Availability

     Location / transport system check on route

 

Can you please help

↧
Search

Activate IS-OIL

September 30, 2008, 10:10 am
$
0
0

Hello all,

 

I have ERP 6.0 (ECC 6.0) with IS-OIL pre-installed however I can't see it in SFW5 or SPRO. Is it de-activated if so how do we activate it?

 

Also I can't find any Installation Manual of IS-OIL under SAP ERP and I guess it is because its built-in.

 

Please suggest.

 

Thanks

Amit

↧
↧

SAP oil&gas - where to start - Any advice on manuals/guides

October 28, 2013, 7:45 am
$
0
0

Hello Gurus

 

I am new to Oil and gas and intend to pursue this segment for the future. I am an experienced computer professional (10+ years) I am fairly well versed with SAP-MM although experience is limited. I am keen to make a career in SAP Oil and Gas - possibly Upstream or Downstream whichever is possible to learn. I am in the midst of registering myself for a course  in Oil&Gas Accounting or Joint venture analyst. I have not found any course for Downstream. With that said, I have even rented a SAP Oil&gas server to practice. The problem is that I need to get some guidance as to how to go about this in a methodical way.

 

I have started to read the manuals along side the SAP - JVA guide that they use for training at SAP. However, there is no step by step guide/manual provided by SAP to really practice or build in order to learn and get a from grasp of the subject. I have found some configuration steps in the SAP Oil&Gas online help files or MySAPOil&Gas while reading. However, the reading of the manuals and online help is only theoretical. One needs some exercises to be performed in order to get a grasp of what is what. Where to start, what to configure outside of basic set-up and why?.

 

Would anybody be able to guide me as to how to pursue my goals?.

1. Is it possible to learn JVA by using the SAP training guide?.

 

2. Is it possible to learn TSW by using the SAP training guide?.

 

3. Does the system need to be configured and set-up before one can use the SAP Oil&Gas server?. - What specific configuration would be required for Downstream outside of the default configuration after installation.

 

4. What sort of configuration / set-up would be required for JVA?.

       (I am aware that every joint venture is different - partner, operator, Eguity group and even Equity)

   a. will the creation of company codes be the usual route as in other SAP modules?.

   b. Is there any special set-up or configuration within the JVA menu for this that is in addition to the normal creation of company code and Enterprise structure?.

  

5. Is there any book or manual that can provide additional information as to how to go about learning this subject in order to practice?.

 

6. What special requirements are required to learn the downstream module apart from the manuals?.

 

7. Can one really learn SAP upstream/Downstream in 30-40 hours being promised/provided by most so called training providers in Bangalore/Hyderabad?.

 

I am seriously looking forward to hearing from experienced professionals. I'd appreciate if contributors avoid one or two line statements as I would like to make the thread more meaningful for me and for others in a similar situation.

 

Thank you for you help and assistance.

 

Cecil

↧

IS OIL configuration related docs

May 28, 2007, 12:27 am
$
0
0

Hi

Please provide me any IS OIL  configuration related docs.

I know the SAP help for isoiles and TSW. I just need the configuration related docs.

Thanks

Mahesh

↧

For object GL_LOCAL 999, number range interval 01 does not exist

September 11, 2011, 11:51 pm
$
0
0

Hi exports

i am using IS oil sap server. we are implemented joint venture accounting (JVA) in this client. when i am using  JVA cash call gross t code(GJ02), i got this issue "For object GL_LOCAL 999, number range interval 01 does not exist"

the systeam given the folloing proceder for solving purpose

 

 

For object GL_LOCAL 999, number range interval 01 does not exist

Message no. NR751

 

Diagnosis

The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.

 

 

Procedure

Create the missing number range interval in customizing.

 

Transaction code:

 

so please help me for this issue how i can solve this it

↧

Tables in PRA

December 5, 2006, 9:22 pm
$
0
0

Hi,

 

I want to know the tables pertaining to PRA in SAP oil and gas, preferrably the name spaces / convensions.

 

Could somebody throw some light on this.

 

Regards,

Srila.

↧
↧

Missing entry: Table G_OIGSM_TAB, Argument

January 26, 2015, 1:52 am
$
0
0

Dear all,

When i revert Loading via a TD shipment by Tcode O4G1, the error occured: Missing entry: Table G_OIGSM_TAB, Argument. Message no. O9690

 

Pls help me,

 

Thanks a lot,

↧

Migration for pack deliveries into loading area containers

February 3, 2015, 10:01 pm
$
0
0

Hi,

 

I need to upload data into SAP for pack deliveries into loading area containers ( T code : O3O_PACK03 ) using LSMW .

Can someone suggest me the approach or any available BAPI for this.

 

Thanks.

 

Regards,

Jitendra

↧
Search

Pricing error In Invoice

February 3, 2015, 2:11 am
$
0
0

Hello SAP Guru's,

 

We are getting a Pricing Error in the Overall Proccessing status in the Document Flow against our Invoice.

This error shown below is something we have never seen before ,I could see that the Previous Sales order which was created on 21/01/2015, Pricing was updated manually on 01/28/2015 and subsequent documents like Delivery with Batch Split items were PGI'd and Invoice created on 01/29/2015 is showing the Unit Base prices from the Sales order but the Netvalue or Netprice has not been copied from the Sales order item resulting a Zero Net value in this Invoice and posting document has not been created due to the Pricing error.

The pricing date shown in Invoice is the Order creation date.

 

Not sure if it’s anything material related,the material was just created recently and I believe this is the first order/billing for this material

Would like to seek your inputs as to what could could be the reason for this Pricing error and Net Value not being copied from Order item to Invoice resulting in Zero Vale Invoice.


Thanks and Regards

Mohammed Roshan


↧

Question about floating roof correction

March 14, 2010, 10:20 pm
$
0
0

Dear all,

 

I have just started to learn how IS-OIL solution is functioning and a question arises regarding floating roof correction.

 

In silo management function, you can simulate the material volume using material density, total height, material temperature and shell temperature(using LVCC calculator).

If the material density is increased, then the material volume is also increased.

(Of course floating roof correction indicator is set.)

 

I don't understand why material volume is increased when the material density is increased in the system.

 

And in a real  business, in what situation is material density increased?

Does that happen when the floating roof is replaced with a heavier one?

In SAP ERP I changed the floating roof weight value but it didn't affect the calculation result of the material volume.

(Note that the material density is not changed, and my understanding is that the density is not changed automatically when the roof weight is changed.)

 

Can somebody figure the above system behavior out and advise practical silo management in oil industry?

 

Thank you,

 

Yasuyo

↧
↧

T code to view SAP directores

March 30, 2010, 3:50 am
$
0
0

Hi

Can anybody tell me the t code where I can see the SAP directores. I actually eant to see the directory wherein the API ASTM routines for the Qty conversions are placed.

thanks,

 

Ritesh

↧

Relationship between RLM and MM, and RLM advantages

February 28, 2013, 11:29 pm
$
0
0

Dear experts,

 

I'm new to IS OIL. Currently I'm preparing a OIL project.

Would you please help to explain below questions?

1. What't the relationship between RLM and MM?

2. What't tha advantage of RLM than ECC MM?

Thank you very much.

 

Richard

↧

RLM - Remote Logistics Mgmt.

March 1, 2007, 9:18 am
$
0
0

Background: IS-Oil & Gas already installed.

We need to activate a few transaction:  IMG requirement is to turn on RLM.  Can anyone tell me if this feature is client dependent and I will  be able to turn it back off?  One of the requirements is to define relevant pants - Can are exiting plants be used w/out additional requirements i.e.. master data screens?

↧
Viewing all 2091 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>